31 lines
1.3 KiB
Markdown
31 lines
1.3 KiB
Markdown
|
# I2S to Webserver
|
||
|
|
|
||
|
|
This sketch reads sound data from I2S. The result is provided as WAV stream which can be listened to in a Web Browser
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
The INMP441 is a high-performance, low power, digital-output, omnidirectional MEMS microphone with a bottom port. The complete INMP441 solution consists of a MEMS sensor, signal conditioning, an analog-to-digital converter, anti-aliasing filters, power management, and an industry-standard 24-bit I²S interface. The I²S interface allows the INMP441 to connect directly to digital processors, such as DSPs and microcontrollers, without the need for an audio codec in the system.
|
||
|
|
|
||
|
|
## Pins
|
||
|
|
|
||
|
|
| INMP441 | ESP32
|
||
|
|
| --------| ---------------
|
||
|
|
| VDD | 3.3
|
||
|
|
| GND | GND
|
||
|
|
| SD | IN (GPIO32)
|
||
|
|
| L/R | GND
|
||
|
|
| WS | WS (GPIO15)
|
||
|
|
| SCK | BCK (GPIO14)
|
||
|
|
|
||
|
|
|
||
|
|
- SCK: Serial data clock for I²S interface
|
||
|
|
- WS: Select serial data words for the I²S interface
|
||
|
|
- L/R: Left / right channel selection
|
||
|
|
When set to low, the microphone emits signals on the left channel of the I²S frame.
|
||
|
|
When the high level is set, the microphone will send signals on the right channel.
|
||
|
|
- ExSD: Serial data output of the I²S interface
|
||
|
|
- VCC: input power 1.8V to 3.3V
|
||
|
|
- GND: Power groundHigh PSR: -75 dBFS.
|
||
|
|
|
||
|
|
|